Tutorial · Phoenix
Windows 11 24H2 stopped getting updates: how to move to 25H2 or 26H2 (and the Secure Boot warning)

Short answer: As of October 13, 2026, Windows 11 version 24H2 Home and Pro no longer get monthly security updates, according to Microsoft. To stay protected, update to Windows 11 version 25H2 or 26H2. Check your version by pressing Windows key + R, typing winver, and pressing Enter. If it says 24H2, open Settings > Windows Update, turn on “Get the latest updates as soon as they're available”, and select Check for updates. 26H2 is rolling out in phases, so if it isn't offered yet, install whatever update is offered and check again. Enterprise and Education editions of 24H2 are supported until October 12, 2027.
What changed on October 13, 2026?
Microsoft's Windows release health page says that as of October 13, 2026, Windows 11 version 24H2 Home and Pro editions have reached end of updates. Those PCs no longer receive monthly security and non-security preview updates. Microsoft recommends updating to version 26H2 or 25H2. Your PC keeps working; it just stops getting new security fixes, which is why it's worth updating soon.
Windows 11 24H2 Enterprise and Education editions remain supported until October 12, 2027.
Step 1: Check which version you have
- Press the Windows key + R, type winver, and press Enter.
- The window shows the edition and version, for example “Version 24H2”.
- Or go to Settings > System > About and look under Windows specifications for Edition and Version.
If it says 25H2 or 26H2, you're on a supported version. Keep installing monthly updates. If it says 24H2 on Home or Pro, keep going.
Step 2: Back up before a big update
Updates usually go fine, but save copies of your documents, photos, and anything important to OneDrive, an external drive, or both. If your PC uses BitLocker or device encryption, make sure you know where your recovery key is (usually in your Microsoft account) before you update firmware or change boot settings.
Step 3: Turn on early updates and check for 26H2
- Open Settings > Windows Update.
- Turn on Get the latest updates as soon as they're available.
- Select Check for updates.
- If Windows 11 version 26H2 is offered, let it download and install. Microsoft says that when it's ready for your device it installs automatically and a single restart completes it.
Microsoft says 26H2 is rolling out in phases over the next few months and is offered to eligible 24H2 and 25H2 PCs that have that setting turned on. If you don't see it yet, that's expected.
Step 4: If 26H2 isn't offered yet
- Install every update Windows Update does offer, including a 25H2 feature update if it shows up, and restart.
- Check again in a few days. Phased rollouts reach PCs at different times, and some PCs are held back on purpose until a known issue is fixed.
- Make sure you have free disk space, the PC is plugged in, and it can stay on for the restart.
- If updates keep failing with an error, write the error code down. That's when it's worth having someone look at it.
The Secure Boot certificate warning in Windows Security
Separately from 24H2, Microsoft is replacing the Secure Boot certificates that were first issued in 2011, because they start expiring in 2026. The new 2023 certificates are delivered automatically through Windows Update. Since April 2026 the Windows Security app shows their status.
- Open Windows Security > Device security > Secure Boot.
- Read the message, not just the color. Microsoft notes a green checkmark alone doesn't confirm the update. The fully updated message reads: “Secure Boot is on and all required certificate updates have been applied.”
What the messages mean
- “…using an older boot trust configuration that should be updated”: install the latest Windows updates and restart when asked.
- “…affected by a known issue… updates are temporarily paused”: no action needed. Microsoft says it resumes automatically.
- “…does not support the automated Secure Boot certificate update due to hardware or firmware limitations”: Microsoft says to contact the device manufacturer. Often this means a BIOS/UEFI update from the PC or motherboard maker.
- “…not yet enough data to classify your device”: Microsoft points to aka.ms/getsecureboot for guidance.
Do not turn Secure Boot off to make the warning go away. Microsoft also advises against dismissing the warning if your PC hasn't received the new certificates, because outdated certificates can block future security updates for the Windows startup process. For most home PCs, Microsoft says no action is needed beyond keeping Windows Update running.
When to call for onsite help
- Windows Update keeps failing, or 26H2/25H2 won't install after several tries.
- The Secure Boot message says hardware or firmware limitation and you need a BIOS/UEFI update done safely.
- You're not sure where your BitLocker recovery key is.
- You have several office PCs to check and update.
See Windows 11 upgrade help in Phoenix, onsite computer repair, and small business IT support.
FAQ
Is Windows 11 24H2 still supported?
Not for Home and Pro. Microsoft says Windows 11 version 24H2 Home and Pro reached end of updates on October 13, 2026. Enterprise and Education editions are supported until October 12, 2027.
How do I check my Windows 11 version?
Press Windows key + R, type winver and press Enter, or go to Settings > System > About and look at Version under Windows specifications.
Why isn't Windows 11 26H2 showing up on my PC?
Microsoft is rolling out 26H2 in phases. Turn on “Get the latest updates as soon as they're available” in Settings > Windows Update, install what is offered, and check again later.
Should I update to 25H2 or 26H2?
Microsoft recommends either. Both are supported; install whichever Windows Update offers your PC.
What does the Secure Boot certificate warning mean?
Microsoft is replacing Secure Boot certificates from 2011 that begin expiring in 2026. Most PCs get the new certificates automatically through Windows Update. If Windows Security says a hardware or firmware limitation blocks it, contact your PC manufacturer about a firmware update. Don't turn Secure Boot off.
Sources
Want me to look at it onsite?
Call or text 859-878-0554, or send the quote form. Based in Phoenix.